V 5.5.5
- It is possible for caretakers of the service group to transfer cages from one group to another group which has access to the rack/room of the selected cages (button "Group transfer" in Cage inspector).
V 5.5.4
- It is possible for caretakers of the service group to transfer mice from one group to another group which has access to the room of the session.
- Improved readability of service reports
V 5.5.3
- Dialog for rearrangement of table columns supports drag and drop
- The rack display of the service group indicates if mice cannot be dragged into a cage because of group restrictions. This happens if the dragged mice belong to a different group as the cage does.
- Version check during startup
V 5.5.2
- Service report also shows mouse count figures
- BugFix: Father determination problems in service caretaker sessions
V 5.5.1
- New cage card printer "CECAD"
- Change in cage card printer "DZNE Mating Extra": Male mating partner is shown even if female was transferred to a new cage
- BugFix: Date display in tables and fact sheets
- BugFix: Cage selection for service caretakers in shared racks
V 5.5
- Attributes in the inspector are shown in a table rather than as indivudual buttons. The behaviour however is unchanged. Attributes shown with a yellow background can be changed by clicking on them. Attributes with a white background cannot be altered e. g. due to missing privileges of the user. Attributes with a grey background cannot be displayed for the selected objects.
- Improved display of owners of the selected mice in the "Owners"-tab in the mouse inspector.
- It is possible to print out fact sheets and reports with all records starting on a new page.
- BugFix: Client Object collision handling
V 5.4.4
- BugFix: Preferences were not read properly
V 5.4.3
- Alleles can be removed from lines if they were added by mistake. If an allele is removed from a line mails are sent automatically to the gurus of the group.
V 5.4.2
- The contents of any table can be splitted according to the content of any column which can be used for filtering (e. g. the Strain or Line column in a mouse table). The resulting subtables are shown in a separate window. In this window there is a list showing the attributes of the selected split criterion. Upon selection of one of these criteria the corresponding subtable is shown.
- Alleles can be made invisible by the GURU of a group
- It is possible for the professional search to use placeholders for the date. This enables you to store preformed search definitions defining dates (e. g. Beginning of last month until end of last month) which will be translated into the respective date only during the search process.
- New column for Mousetable: Weaning deadline indicates the number of days until the mouse should be weaned
- Rack overview: improved display of shared racks.
V 5.4.1
- There are several new tabs in the mouse window in which the mice of different age are automatically collected. You can check here for e. g. the newborns, the kids which should be weaned or the very old mice.
- New columns for Mousetable: Father ID, Mother ID and an indicator for weaned mice
- BugFix: Automated correction of cage-rack problems
V 5.4
- New Search module "Professional search" which allows to create and store simple and complex nested search definitions out of a large number of mouse attributes. It is invoked via pressing the "Search"-button in the Inspector. Select the the new button "Professional search". A window appears where you can specify either a simple search definition (all criteria must match or at least one criterion must match) or a complex search definition in which you can group criteria in "AND" groups (where all criteria must match) or "OR" groups (where at least one criterion must match). These groups can be nested and criteria can be inverted. Search definitions can be stored for later reuse.
- Room selection dialog at startup for service caretakers shows the number of tasks in the respective rooms
- In the father selection dialog in case of multiple possible fathers the "Show all objects" button is selected by default
- BugFix: DZNE Mating Extra printer didn't show removed father in special cases
V 5.3.2
- Empty Racks are shown in the selection field of the rack window and in the overview window at the bottom using a lighter font.
- Tasks of mice are also indicated in cage tables by the little triangle in the first column.
- If the selected mouse in a table has defined tasks or the selected cage in a table has mice with defined tasks, you can directly switch to the tasks window by clicking "Show tasks". The respective tasks are collected in the "Temporary" tree node and shown in the tasks table. Here you can see, edit ore remove these tasks.
- There is now an extra blank line for each weaned mouse in the weaning report
- Changes in Printer "DZNE Mating Extra" and "DZNE Backcrossing"
V 5.3.1
- New cage card printer "MSSM_Rendl"
V 5.3
- Improved calculation of litters.
- Cage card view faster and less memory consuming.
- Cage color mode "Mating performance" now faster.
- Refactoring of cage card printers.
- Fact sheets with scaled tables. There was a problem with tables which were too wide
- Display of fact sheets while dragging slightly modified
- Cage card printer "DZNE stock" again shows the name of primary owner
- BugFix: Display of male and female pups from litters was in some cases wrong
- BugFix: Session information (new mices, weaned mice etc.) was cleared in dormant mode
V 5.2
- Session reports. You can get reports for all mice which were created, removed or weaned and for all cages which were created or modified during the actual session. They can be created via the "Report" button of the Inspector. If there are any of these objects present you can select "Session report" in the litle selection dialog. Onbly those categories for which there are objects are selectable. Those sets which changed since teh last seisson report are preselected. The session reports can be treated like regular fact sheets.
- Cage card view. In the rack window you find a new button "Card view" just beneath the "Overview" button. Clicking this button brings up a window in which you see a different graphical representation of one side of the actual rack. But here each cage is represented by it's cage card. You can change rack, side, cage card type. The zoom factor can be changed via the selection boxes and using the mouse wheel having the CTRL-key pressed. The visible part can be moved via simpel mouse dragging.
- More Page formats are available for printouts
- Primary cage owner can be displayed in cage tables
- BugFix: Display of removed lines in Line selection supressed
V 5.1.5
- Notification area in Inspector for new mail or new tasks. This area will turn red if new objects of interested arrive. Clicking this label wil bring the respective Tabel to front and cancel the alert. The alert will go away automatically after 5 minutes.
- Object selection field gets a light red background if new mail or tasks arrived
- In the Admistration Client there is a new tab showing all running client sessions. The Administrator can selectively kill any of these sessions.
- Strains in the Strain selection are presented in alphabetical order
V 5.1.4
- BugFix: Problems concerning notification of sessions without login
- BugFix: Removal of groups from racks in service group
V 5.1.3
- BugFix: Genotype display in intercross report
V 5.1.2
- Caretaker can enter results for experiments
- Startup procedure improved
V 5.1.1
- BugFix: Automatic creation of service group fixed.
- BugFix: Mouse mark color mode fixed.
- BugFix: Import of backups could lead to creation of empty task entries.
V 5.1
- Group reports can be created for prior periods (starting with the use of this version) You can create ad hoc reports (just the ones you know). In addition you have the opportunity to create reports for a specific date or a period in the past. You will get a similar report which shows average, minimum and maximum of mice, cages and matings for the various criteria.
- New Cage card printer: DZNE mating Backcross
V 5.0.3
- New color mode: Cohorts
- Careakters can launch report and can select lines, loci etc. in the object selection field of the inspector
- BugFix: Task Withdrawal had problems
V 5.0.2
- BugFix: Display problem of color mode selection field on Mac computers
V 5.0.1
- BugFix: Problem setting yourself as owner of mice
- BugFix: Problem creating new cages via the cage inspector
V 5.0
- Service group.
- Mouse cohorts.
- Owner groups. The guru can define groups of users which can be used as owners of mice like normal users. But you can alter these groups afterwards. The ownership is always determined on the fly. So for a given user Mausoleum checks the three possibilities for a mouse ownership:
- The mouse has no defined owner. In this case all users of this group own this mouse (if this is possible for the given user)
- The user is a defined owner of this mouse
- The user is part of an owner group which is defined as owner of this mouse
- Security level for rooms. In general Mausoleum does not like transfers of mice between different rooms which have a defined security level. Nothing changes if the mice are not sitting in a room with a defined security level or if they are not moved in to a room with a defined security level. But if mice are transferred between rooms with defined security level you will get an Mouse Pope Alert and an email is sent to the responsible people. If the security of the target room is higher the user has to justify the transfer by a comment which is appended to the mail.
- Pool area can be used also for cages
- More than one cage can be dragged to transfer area or pool area
- Colors in tables can be chosen using "Arrange columns"
- Info-Dialog. You can invoke a dialog with informations (current version and version history) by clicking the "Info"-button in the Inspector
- Caretaker is generally allowed to set license
- The Guru can revive dead mice. Be careful using this feature!
- Column widths can be adjusted using the context menu
- The width of a single column can be adjusted by double clicking the column separator in the column header
- Printer DZNE Mating Extra modified
- Table printing improved
- Cage and Rack can be displayed in Task table
- Cage snapshots and total content of cages are shown as tabs in one frame
- Newly created mice, imported mice and litters are shown as tabs in one frame
- Preferences are grouped in separate tabs
- Complex sorting definitions can be defined and stored for all tables
- The last set eartag is stored and the next number is used as default for the next eartag
- There is an extra tab in the inspector for lines, loci, starins etc. showing the cages where mice with the selected object (e. g. line, locus, strain etc) can be found
- The user can define via the Preferences which color modes are needed and also can set the order inwhich they are presented in the selection boxes.
V 4.24.11
- Demo creation improved. ZIP file exchangeable with Apple systems
- Minor GUI changes
- Extended search criteria "died before" fixed
V 4.24.10
- Added a little tolerance to the father determination. The general rules still apply:
The rules are as follows:- If we find a unique candidate take this
- If there are more possible candidates let the user decide which one
- If we find no candidate the user can chose from mature cage mate(s). Was included because there could be an error in the date of the mouse transfer or the user imported a couple which was already in a mating in the group from which it was exported.
- If there is still no candidate the user can choose from all actual male mice which were mature at the date of conception
- If also there was no possible father (resp. the user didn't choose one) the litter is created without father
But the primary candidate determination was a bit too strict in some cases. The begin of the "hot phase" is assumed to be 28 days before delivery and ends 16 days before delivery. If no potential father could be found Mausoleum tries day by day for additional 6 days. If there is a unique candidate this one is chosen. Otherwise the above mentioned rules b) to e) apply. - The Administrator can prepare demo versions of Mausoleum with the data of individual groups. This gives you the possibility to give this demo versions to new lab members to become a bit familiar with Mausoleum without modifying your actual data
- Strains can also have a specific color
- New color mode: Strain
- New color mode: Line/Strain. This color mode is a bit peculiar. The color at first hand is determined by the mouse line. If it is a breeder mouse the strain color is used. But this color is then surrounded by a grey border.
- Demo version is visualized in Scrollpanes
- If you add a comment to a cage (using the "Add comment" button) you have the option to add it also to all mice in the cage automatically
V 4.24.9
- More recipients for mail can be specified
- The actions which are invoked by pressing the blue buttons in the "Actions"-area of the Inspector can be invoked via the context menu
- Litter detection is more tolerant regarding the litter date. E. g. If you enter a litter and you have to add more pups shortly after (Maximum 3 days) Mausoleum will now group these pups together as one litter
- CIBIR printers show multiple lines per parent in mating cages if one line is too small for the information
- Strains can be defined as a mixture (e. g. if you want to set a strain of an imported mouse to 50% BalbC and 50% C57)
- While creating a litter with a strain mixture mother's strains will be the first ones shown for the pup
V 4.24.8
- Intercross report can now be generated also between different lines (actually it can be an intracross report). Results are shown in a table ordered by line and genotype of the pups.
- New cage card printer DZNE backcrossing. It behaves similar to "DZNE Stock" but shows below the parent line the strain composition of the pups.
- CIBIR printer also shows genotypes of parents in mating cages
- BugFix: Patterns are supported by all cage card printers
- BugFix: Patterns can be removed from Lines etc.
V 4.24.7
- BugFix: Sending of new mail improved
- New cage card printer caesar Mating II
- changes in cage card printer caesar: For parents also the alphanumeric tag is shown if present
V 4.24.6
- Guru can remove Weaning alerts. To do so the Guru selects in the weaning alert table the cages of which the alert has to be removed. Then one selects "Mark as weaned" in the context menu of the weaning alert table.
- New mail shows up immediately in the mail table of the recipient
- "Return" key can be used in all simple requesters parallel to the "YES" button (if a requester doesn't do it please report)
- New cage color modes: Cage mark and Mouse marks
- New cage card printers caesar and caesar mating
V 4.24.5
- Modification of DZNE Harem Printer. Eartag of females is shown
- Modification of CIBIR printer. Alphanumeric tag is shown for parents
- Modification of Koeln printer. Number of adults
V 4.24.4
- Mice in Tooltip and on cage cards are sorted by Eartag and System-ID
- new cage card printer Koeln Mating Extra shows parents also if they already left the cage
- BugFix: Mating report shows up upon Menu selection
V 4.24.3
- For lines, licenses and users also patterns with two colors can be used
- Prefix "M" and "S" removed for mating and stock cages, when mating mode is selected for Cage color mode
- If a litter is produced from parents which do not have the same line and more than 1 line matches exactly the loci and alleles of the parents you can select form the matching lines which one will be used for the offspring
- Double click on Mouse shows again the ID-card
- new cage card printer DZNE Harem
- new cage card printer DZNE Mating Extra shows parents also if they already left the cage
- DZNE-Mating printers marks pups as alive if they either are still in the cage or left the cage not by death. It does not check whether the pups are really alive at the moment of printout.
V 4.24.2
- Plugdate-display improved
- Task ID can be shown in Task tables.
- Connected tasks (i. e. tasks which were created together e. g. you select two mice and add the task "transfer") can be selected in task tables via the context menu.
- Improved search for genotypes. Using "Extended Mouse Search" you can specify also genotypes for non autosomal loci. You can also select alleles for more than one locus. Using this you can search for specific complex genotypes.
- CIBIR printer shows parent information per mouse
- New Printer DZNE Stock shows mice sorted by parents and displays information about the parents in separate line
- BugFix: Allele name in New Line-Requester
V 4.24.1
- BugFix: Creation of new Cages was blocked
V 4.24
- Generation markers can be set for each mouse. They can be viewed in the mouse tables as P, F1, F2... by selecting the appropriate column. While generating a litter Mausoleum calculates the generation of the offspring. If you defined the generation of an animal this number will be displayed. Otherwise the generation is calculated from the generation markers of mum and dad if available. If there are differences (e. g. you cross a F2 with a F5) the generation marker of the offspring is the the largest number from the parents + 1. But the generation markers of the parents will be displayed in this case.
- Individual standard task can be defined with automatic completion by setting a result for a given experiment
- Tasks are shown for all mice which can be modified. Even if a different favorite is set.
- In Task list and Schedule you have a separate mouse table which shows the mice of the selected tasks. You can change their attributes directly from there.
- Weaning alert ans plug alert is checked also for foreign cages and mice if privilege is sufficient. In the responsible tables the "A" button shows normal behaviour
- When cage color mode "mating" is used, mating cages where at least one of the parents has a missing genotype are shown in a darker red color
- Mouse ID-card is only shown as tooltip in genealogy tree or factsheets. Separate action button in mouse inspector was removed
- Mating report, visit report and plug report can now be invoked via the context menu (right mouse button) in mouse tables.
- Table with killed, newly created or weaned mice is shown in separate tab with the main mouse table. Separate action buttons in mouse inspector were removed
- Table with newly created or touched cages is shown in separate tab with the main cage table. Separate action buttons in cage inspector were removed
- Tables fo lines, strains, loci, rooms, experiments and users are shown in one window as separate tabs
- Mouse pool buttons in Mouse inspector
- Login window will close after 10 minutes without input
- Creation date appears on group report
- Aumtomatic genotyping cannot be set for non autosomal loci
- "Add comment" button in cage inspector for setting the same comment for more cages at once
- CIBIR printer has smaller font for mouse info; alphanumerical tag added
- OsloMating printer shows all cages as matings and also the litters even if one of the parents already left the cage
- New Printer DZNE Mating
- BugFix: Weaning Alert picked up to many cages during session
- BugFix: Weaning Alert and Plug Alert was deleted while sleeping
V 4.23.2
- New CRIB printer
- Use of shorter date format on cage labels
- BugFix: Sleepmode panel in inspector visible -> Return to active mode possible
V 4.23
- Fact sheets for all objects. This feature gives you nicely formatted fact sheets for the selected objects in a table. Select "Show fact sheet" in the context menu. It will show all relevant data. You can also use the fact sheet frame like browser. You can click on everything which is shown in blue. But you can also use multiple tabs (names are changeable), move backward, forward or open link in new tab or window.
- Group report changed to new fact sheet format.
- Visit report changed to new fact sheet format.
- Mating report changed to new fact sheet format.
- Plug report changed to new fact sheet format.
- Mating, Visit, Plug report and Breeding performance are part of the Mouse factsheet
- Object logs are now available (correcting also some oddities reported by M. V.) for all objects. You get it by selecting "Show object log" in the context menu of tables. It shows all the the sessions and the commands by which the respective object was modified
- Session protocols are revised. As a Guru you select the User and click on "Show sessions". In the resulting window you see a list of all sessions from this user. You see the session with commands in bold. Clicking on one of these sessions shows in the panel on the right hand side all the commands performed during that session.
- Licenses can be specified with Attributes like license holder, start and end of validity and maximum mouse count. You can also specify the users, who might use the respective license. In the Mouse inspector you find an extra button in the "Attributes" tab where you can specify the license for the selected mouse. The License table shows you the maximum number the used number and remaining number of mice as well as the killed, died and exported mice for the licenses.
- Documents can be attached to Rooms, Loci, Lines, Strains, Experiments and Licenses. These document can be seen in the "Documents" tab of the respective inspector. You can download the selected documents to the client computer.
- Finetuning of user privileges. The privileges of a user can be seen on a very basal level in the "Privileges"-tab of the user inspector. The Guru can selectively remove any of those privileges for the other users. E. g. A caretaker might have the permission to specify the eartag but not the genotype.
- You can specify a time preference for Tasks (morning, noon, afternoon etc...)
- In the Task window you will find in a second tab a schedule of all your pending tasks. You can specify the time period (i. e. how many days from today on) should be shown. You can also get printout. If you select a task you will see the details of the task in task table below the schedule.
- You can change the due date and time preference of tasks (if you are issuer of the task or Guru) in the schedule tab by drag and drop.
- Additional standard tasks can be defined and edited in a third tab of the Task window. You can specify the description of the task, whether the task can be assigned to male, female, unset or any mouse and the action by which the task is automatically finished.
- Also task bundles can be defined. You can select two or more standard tasks and declare this bundle as a new standard task. You can then specify a day offset and a time preference (morning, afternoon etc.) for each of the primary tasks. If you later set such a task-bundle to a mouse several tasks are created for each of the primary task at the selected date plus the day offset specified before.
- Improved determination of father during littering. The rules are as follows:
- If we find a unique candidate take this
- If there are more possible candidates let the user decide which one
- If we find no candidate the user can chose from mature cage mate(s). Was included because there could be an error in the date of the mouse transfer or the user imported a couple which was already in a mating in the group from which it was exported.
- If there is still no candidate the user can choose from all actual male mice which were mature at the date of conception
- If also there was no possible father (resp. the user didn't choose one) the litter i screated without father
- Sleep mode. Client sessions in sleep mode can not change or view any data, but can be come back to normal immediately if enough licenses are free. Sleeping clients are not counted as active when license count is checked during login.
- Automatic sleep mode if user is inactive for more than 30 min. A dialog is shown for 2 minutes in which the user can disapprove the automatic sleep mode.
- Old users are not shown as owners if mouse belongs to whole group
- Old users are not shown as possible recipients of mail
- Before/after date of exit (death or export) as additional criteria in Extended Search
- Improvement of cage-card tooltips
- Display of dates standardized and date display format can be chosen in Preferences
- Licenses on cage cards will be displayed according to these rules:
- if a License is set for the cage set this is used with "[c]" in front.
- if licenses are defined for the mice these are used with "[m]" in front
- if nothing is found by (a) or (b) the group name is used with "[g]" in front
- Plug date alert and Weaning alert are now a part of the Tasks window.
- Search for cages or mice now also available via general Inspector button
- Simple mouse search is now a non modal Frame and search results are kept in (closable and renameable) Tabs
- Genelogy information is now shown in one Frame and pedigrees are kept in (closable and renameable) Tabs
- General group report now also available via general Inspector button
- Improvement of Excel im- and export.
- Zoom factor for cage card tooltips can be set in the Preferences tab
- New columns for Mousetable
- Right mouse click does not affect selection in tables even if clicked in unused area (below object rows) but Popup-Menu is shown.
- Inspector is resizable
- Font size for tables can be set in Preferences
- Mouse tables in inspector selectable
- BugFix: Undo/Redo could lead to Objects with erratic attributes
- BugFix: Sorting by age in mouse tables identical for living and dead mice
V 4.22
- Redesign of Inspector
- Mice having selected Line/Locus/User can be seen directly in "Mice"-tab in the respective Requester
- Improved Initialization-Process
- Improved Cage-Coloring; Explanation of colors as tooltip in Mode-Selectionfield
- Task of removed objects (e. g. killed mice) are shown in a separate category, are regarded as finished and can be deleted
- BugFix: EOF-Exception in some environments while shuttingdown client
- BugFix: Occasional Dead-locks
V 4.21
- Technical ID, Group etc. as potential columns in Task-Table
- Two cage color modi: "all Tasks" colours pending, in progress and finished tasks (light yellow), "active tasks" doesn't highlight finished tasks. If "all tasks" is selected the also little triangle and the task-tooltip is shown in tables for mice with finished tasks; otherwise not.
- Mouse pool can be used to collect mice from different sources (like shopping cart on Amazon's web site). Available via popup-menu in mouse lists. In addition the pool is shown in the rackdisplay close to the transfer area. Mice can be put into the mouse pool by drag and drop. In this field double click opens a window with the mice in the pool. Also a popup-menu is available in this field.
- Refined automated genotyping. If parents have different line than offspring and a specific locus is missing in the line of one parent this parent is regarded to be homozygous for the respective wild-type allele
- Automated genotyping can be switched off for lines and loci
- Improved generation of genealogy diagram
V 4.20
- Dates for Task can be set to distant future
- Setting genotypes is a standard task
- weaning check is done even if only mother is defined
- Problem fix: massive logging in some environments blocked
V 4.19
- Excel im- and export
- New Task concept (find document in Mausoleum User Group)
- New privilege management
- New design for Plug-Report
- Cage cards can be used as tooltip
- New user role "External". Can see only his own mice and cages
- "Show position"-button in Task-Inspector
- New cage color mode: Tasks. Color scheme as in the Task-list
- New cage color mode: Breeding performance. A mating cage is green it has been less than four weeks since the last litter, orange (or yellow) if between 5 and 8 weeks since a litter and red if more than 8 weeks since a litter.
- Main user of cage (e. g. for cage cards) is the user, who is primary user of most of the mice in the cage. If there is no unambiguous result, Mausoleum looks for the user who owns most of the mice in this cage. If there is more than one the user names are sorted alphabetically and the first one is used as main user.
- More than 100 mice can be created.
- Caretakers cannot be selected as mouse owner
- EXTERNAL users can neither add plug-dates nor import mice
- Right mouse click does not change selection of tables
- Export of mice includes plug dates, alphanumerical tag and maturity limit
- You can specify whether Cage-numbers or the System-IDs of cages are displayed
- You can search for a specific tag within the actual mice and for System-ID within all mice
- You can search for cages with specific system-ID
- System ID, group, Start- and End-Date of the respective object can be shown in all tables
- New mail requester: Recipient is selected (not typed in as before)
- Better distinction of allele and locus in Genotype-Dialog
- Rack-Display "nicer" for small racks
- Mausoleum version and logged in user is shown in Inspector title
- Mauosleum version and build date of server and client is shown in Initialization-window
- BugFix: Requester for specify allele order shows actual allele names
- BugFix: WT-allele display in Locus-table adapts to allele-Renaming
- BugFix: Data extraction from email
- BugFiX: Change of Administrator password
- BugFix: Mating-Information (image) is transfered from tables to Clipboard as "x"
V 4.18
- Bugfix HeadLess Exception during Server startup
- Bugfix tester2 Group in Mausoleum Demo
V 4.17
- Improved Backups
- Improved Mouse report
V 4.16
- Bug-Fixes (Label-Printers)
V 4.15
- Tables can be filtered similar to Excel's "Autofilter" (invoked using context menu command)
- MouseTable in RackFrame can be resized. a) change width of RackFrame -> cages get bigger/smaller b) change height of RackFrame -> MouseTable gets higher/smaller
- Eartag-Prefix for lines (useful if eartag numbers are in scarce)
- Tag for lines (use it for grouping your lines)
- "Removed" Lines, Strains, Loci and Users can be seen and "revitalized" by Guru. In order to see these objects use the "A"-button in the upper right corner of the respective list. For (Frankensteinian) Revitalization click on the object and select "Activate object" in the Popup-Menu
- smaller DMBR-Dymo Printer
- Mating indicator either sign or letter
- Improved table printing
- Bug-Fix Mouse Import from email
V 4.14
- new DMBR-Dymo Printer
V 4.13
- Bugfix in Plugdate-table
V 4.12
- Alleles can be renamed by Guru
- Search all cgaes (also removed cages) with a given cage number (click on "Search cages" and find the button at the bottom.
- Display of all mice which were in a cage (Button in Cage-Inspector)
- Search for specific genotype improved
- LabelPrinter "Köln SPF Neu" slightly modified
V 4.11
- Plug date History
- there is the new TAB for the mice, where you can see all the plug dates (also the historical ones from now on) for all the selected female mice.
- the date of the actual plug.alert is highlighted
- you can add plug dates (if only one female mouse is selected). This does NOT add a plug-alert. For this function you still use the lower "Set plug day"-button
- you can also delete specific dates from this list. If the date to delete is the actual plug-alert this one is also removed.
- for the selected male mice you can create a "Plug report". Here you find all the female mice which met the respective male mouse and the dates of the plugs they had while being together with the male mouse is shown.
- automatic Focus for Password when Username and groupname is set
- A button in the Cage-Inspector to move a group of cages to the transfer area.
V 4.10
- Birthday-Column in MouseTables
- Database check for unfinished Visits
- Oslo-Printer
V 4.9
- Multi-language support (Svenska) improved
- Maturity Limit (Days until mouse become sexually active) can be set for Strain, Line and Mouse. Data processing order: Mouse > Line > Strain > DEFAULT (6 weeks)
- Mating mode of cages is always determined by evaluation of actual mice
- Caretaker creates new mice -> automatically "share with all users"
- Caretaker creates litter -> automatically "use privileges of both parents"
- improved startup sequence
- Cages containing mice without line are displayed (using line color mode) with a hatched pattern. These cages do not look empty anymore.
- display bug fixes: drag and drop in transfer area and right half of double cages
V 4.8
- The name and color of the primary user can be shown in a separate column within the mouse-tables. The color of the primary user is not longer shown in the "Mark"-column
- Users can only be removed if they do not own any mice. That's only for safety reasons....
- The rack display was not sufficiently updated when the color of an user changed and the cage-display-mode was "User color"
