V 6.9.8

New columns in Mouse tables: Genotype of father and mother. But be careful in using these columns. They can substantially reduce the performance.
It is possible to search for mice with embryo transfer even only for a specific line after or before a given date or within a period
It is possible to show Extended foster reports for more mice
It is possible to reactivate tasks.
You can specify minimum and maximum age for standard procedures. This is checked, when a task is supposed to be added. Then the age of each selected mouse is checked for these limits and the user is informed by the mouse pope if there are problems.
Users can be tagged as veterinary
It is possible to send mails regarding a specific mouse to either the owner of this mouse or to the veterinaries of the specific group and the service group or both

V 6.9.7

New Printer "caesar fish"
BugFIX: Input of floating point numbers as result

V 6.9.6

New Pope-Alert if mice with health issues are set up for mating
New column for cage and mouse tables. Combined indicator for matings and display of how many days a female was separated from a mating if applicable.
Group statistic reports are performed also on server during backup

V 6.9.5

New report mode for GURUs of individual groups and the head of the service group: It is possible to perform a multidimensional analysis also for dead mice. You have to specify the dates for beginning and end of the period of interested. After a little while you are able to perform a multidimensional analysis just like with the living mice.
New Cage color mode: Litter count
New mouse table column mode: Litter count
New item in symptom lists: unclear eye
It is possible to define the primary user of a owner group
If a mail is sent to the primary users of a mouse also the primary user of the owner group is receiver of the mail
Additional frequencies for period tasks: semiannual and annual
Service caretakers can only see position of mice in the rack or change attributes of mice which are in the room for which the user has logged in

V 6.9.4

All tables can be scaled individually by using the mouse wheel while CTRL is pressed. It is possible to enable or disable this feature via the Preferences

V 6.9.3

Eartag prefix of lines and strains is shown in the respective tabs of the groups-inspector for the Head of service

V 6.9.2

Eartag prefix of lines is shown in the dialogs for line selection of mice and embryo transfers
BugFIX: Individual scaling factor wasn't used properly

V 6.9.1

Access to rooms can be restricted for regular users and caretakers of the service group

V 6.9

Improved handling of period tasks. Not only next date is shown but also a past one if the task was not performed at the scheduled day.
It is possible to define a period task for a set of weekdays (e. g. every Monday, Wednesday and Friday)
It is possible for members of a regular group to view also historical and deleted tasks for a given mouse
It is possible to change the favorite user for a task
It is possible to change the description of a non-standard task
It is possible to set an individual zoom factor for each table via the context menu or CTRL-MouseWheel
One can specify a user and client-computer specific scale factor for the size of all GUI-elements
New attribute for users: Full name. It can be specified in the Preferences which name of the user is shown in the tables
New Pope-Alert if mice of different lines are pooled in one cage. Visibility of this alert can be specified in the Preferences
Documents can be added via drag and drop into the documents table in the inspector

V 6.8.3

Health reports for Racks.
- As Head of the service group you find (in the tab "Definition lists") definitions for various microorganisms and their detection methods. You can modify or enter new items.
- After selecting one or more racks a head of the service group can define rack health reports. First you have to specify the date, the name of the "performer" and which of the germs were tested. Thereafter you can specify how many mice were tested per rack and how many mice were tested positive for each of the germs.
- The rack health reports are shown in the "Health reports" tab of the inspector and on the fact sheet of the rack.
- The head of the service group can create an Excel based report for one or more racks or one room for a specified time period. In this report for all the tested germs and detection methods the number of positive tested animals is shown
It is possible for Administrator and the head of the service group (via the "Standards" button) to define a startup message which is shown in the login dialog to all users
It is possible for Administrator and the head of the service group (via the "Standards" button) to define a general information concerning all issues of the institute for all users which is shown in the Info dialog
It is possible for Head of the service group and the Guru of regular groups (via the "Info" dialog) to define a group specific information for all members of the group which is shown in the Info dialog
The Image shown for a mouse result can be copied to the clipboard
CECAD printers show "GVO" mark in blue color
In the dialog used for selection of the locus and alleles while creating a new line it is possible to easily select all or no allele
If a litter is defined as result of an embryo transfer the link to the foster mouse is kept and can be shown in mouse tables and the factsheet. In addition the foster mouse is also taken into account while using the cage color mode "weaning". There is also an additional "Extend foster report" available for foster mice
New coat color "nude"
Embryotransfer-Informations can be edited
The dialog used to add a new Embryotransfer remembers the selected values
One can specify a shipment-ID while creating new mice

V 6.8.2

It is possible to restrict the displayed task-types in the rack display. Use the "triangle"-Button in the upper right corner
The sessions table in the Administration client shows the room name for service caretaker sessions
BugFIX: Group transfer could lead to redundant 'breeder' lines

V 6.8.1

Mausoleum will scale its GUI elements according to the screen size
BugFIX: Line transfer if identical loci were disabled

V 6.8

Stress evaluation report for the german interpretation of the european Protection of Animals Act
Stress evaluation report available for selected mice as specialized fact sheet
Improved display of mouse owners
Improved display of legend for Head of service Rack overview in strain mode
Reduced memory consumption on client
Improved line, strain and user selection in extended and professional search dialog
BugFIX: Mail was not sent properly to Issuer of task if task was rejected

V 6.7.4

New report for the german interpretation of the european Protection of Animals Act
In the tables for Results, Clinical symptoms and Stress levels it is possible to use all columns used in mouse tables
It is possible to clear the comment of mice
It is possible to search for mice with litter/weaning/animal evaluation reports
The head of service user can retrieve a line usage report which shows the number of all living mice in all groups of the selected lines

V 6.7.3

It is impossible for the head of service to remove group access to a locus if this locus is used in a line for which the group has access
Extra button in the groups tab of the line-Inspector of the head of service. It is possible to adjust the locus access for the selected lin if the loci of this line are not avialable for the individual group

V 6.7.2

Changed notification emails if a mating-task is scheduled, a mating is setup or a litter is produced for a couple where there is no matching line for the offspring.
Improved handling of special characters in names of standard tasks
It is possible to reduce the number of visible cage card printer types via the "Preferences"
BugFix: Problems with Undo/Redo if object were changed simultaneously from regular and service group fixed
In the notification email in case of matings without matching line for the head of service users the group of the animals is included
BugFix: Rack Overview didn't react properly to cage color mode change

V 6.7.1

It is possible to add documents to users. Only the user and Gurus or "Head of service" users can see these documents
It is possible to open documents directly if a program for respective file is defined. This can be done either by clicking the "Open"-button or double-clicking the respective document.
The head of service user can determine if notifications are sent to all gurus of the respective group and heads of service if a mating-task is scheduled, a mating is setup or a litter is produced for a couple where there is no matching line for the offspring. The setting can be changed using the "Standards"-button in the inspector.
Improved handling of documents while im- or exporting of exports to or from service group
BugFix: Changing cage numbers for Double cages led to inconsistent cage numbers
BugFix: Subtracted user privileges are checked for notification emails to service group

V 6.7

New Module for the german interpretation of the european Protection of Animals Act
New privilege "Change Eartag" which enables user to chenage an existing eartag and can be granted independently of the privilege "Set Eartag" which allows users to set the eartag for mice without eartag
It is possible to define standard values for animal maturity and wening period
It is possible to remove specifically a single owner or ownergroup from a mouse
It is possible to search for an eartag range also if eartag prefixes are used in the extended search dialog
It is possible to search for the foreign ID of cages
Access to Ensembl-records and MGI/ZFIN-records works for mouse and fish

V 6.6.3

BugFix: Standard-Task table problems after editing standard tasks

V 6.6.2

Toggle buttons in Mouse and Cage tables are shown with red background if not all objects are shown.
Improved display for period tasks in the login dialog for service caretakers
You can define complex default sort definitions for all tables using the "Extended sorting" menu
In the Dialog for mass-mating arrangments mice can be sorted according to the column content
It is possible to define for standard task a sex restriction which allows this task only for mice groups matching mating restrictions (male and female etc.)
If the head of the service group logs in to groups the head of service preferences are used and modified
Improved update mechanism for group hopping sessions of Head of service users
LIMES cage card printer user determination for user groups adjusted
Traffic report table includes the timestamp of the command and is sorted accordingly
Standard tasks with auto completion "check sex" or "check plug date" are automatically finished even if they were defined as period tasks

V 6.6.1

Improved Locus transfer form service group to regular groups
Improved Allele display in Locus inspector
In the Results- and Symptom lists-Tab the latest Result or Symptom list is selected automatically
BugFix: Extended litter report was not shown if only one litter was present

V 6.6

Mass matings as standard task with special dialog for defining the respective couples
Mice can be marked as sterile or vasectomized
Default coat color for strains
It is possible to enter more complex strain mixtures for mice
Period tasks can be marked as done for single days
Period task are removed after the last day of the period
On the mouse fact sheet for all the cage mates of the mouse the start- and end-dates of the respective meeting are shown
It is possible to define if standard tasks can be used only at a fixed date, a period or both
It is possible to define if standard tasks can be used only if animals from a single group are selected
BugFix: Changing the birthday didn't change the litter information on certain cage cards
BugFix: Display for "Set pregnancy" in object log was incorrect.

V 6.5.3

New autocompletion type for tasks. Tasks with this autocompletion will be finished as soon as exactly the animals which were selected for the respective task are in one cage.
If a new task with the autocompletion "by transfer to a mating" or "by collecting exactly the selected mice in a cage" is issued an extensive check for upcoming problems is done and the user is informed by the Mouse-Pope.

V 6.5.3

Head of service and Administrator can edit the holidays valid in the institute. If a user schedules a task for either weekend or holiday the mouse pope shows up.
If the line of a mouse is changed, the genotype is conserved if possible
New Cage Card printer "UPenn V2"
New mode for multidimensional mouse analysis: Alphanumerical tag
New room security level "Super-High"
Cage color mode "Clinical Symptoms" differentiates between filled (red) and empty symptom lists (green). It uses the most recent symptom list of each mouse in the cage.
Change in litter display of "CECAD ivRF" printers
BugFix: Multidimensional cage analysis: "Mark" didn't work as expected

V 6.5.2

It is possible to save the current settings of a multidimensional search. Thereby each user can create a set of standard multidimensional reports
It is possible to show the rack position of more mice (direct or indirect via the task-table) or cages if they are located in the same rack
While rearranging table columns a preview of the selected column for the objects in the respective table is shown in the dialog.
There is a new mouse tab for users who can own mice which shows all the removed mice dependent on the date and the mode of the removal. The collection of removed own mice starts with the installation of the new Mausoleum version.
CECAD ivRF Mating printer shows litters in chronological order (oldest on top)
BugFix: Window with newly created mice or litter didn't appear anymore

V 6.5.1

New attribute for mice: Special date. In this multi-purpose field you can store a date value. This value can be displayed in mouse tables and in addition you can also show the difference in days between this date and the end date of the mouse if both dates are set.
In the head of service client tables for lines, loci, strains, etc. can be sorted by the names of the groups with access to the objects

V 6.5

New cage color mode "symptom lists" which highlights cages containing mice with reports of clinical symptoms
If a head of service user logs in to a regular group he can set the owners of mice
Group names in the tables for racks, rooms etc in the service group are sorted alphabetically
If cages or mice are transferred to another group the can be transferred to a specific owner
If cages or mice are transferred to another group the tasks of the mice are also transferred
It is possible to permanently delete lines, loci, strains and users
The head of the service group receives an emial id a new rack is created in a regular group
Mating performance report for the selected mice
Changes in cage card printer "LIMES"

V 6.4.2

Changes in cage card printer "LIMES"
BugFix: Dormant mode failed when logged in via the head of service account

V 6.4.1

BugFix: Searching all or dead mice failed

V 6.4

Administrator and the Head of the service group can edit the standard privileges for the system. Use it with care!
The head of the service group can login to the individual groups. This is not possible for the administrator anymore.
The head of service can define rooms as inaccessible for members of regular groups. For cages and mice which are in these rooms the following restrictions apply to users of regular groups
- Mice and cages cannot be moved
- Mice cannot be killed
- It is not possible to report a litter, a plug or mark mice as pregnant
- It is not possible to report clinical symptoms
- It is not possible to set eartag, sex and coat color
- It is not possible to start, finish or reject tasks
The eartag of a mouse can have a prefix which is independent of the eartag prefix of line or strain. This prefix can be set individually per mouse. The last used prefix will be stored analogous to the last used eartag.
It is possible to remove the cage tables from the rack display via the setting "Show cage tables in rack view" in the "Cages"-tab in the Preferences dialog
In the mail inspector there is an additional table which shows the mice which are connected with the selcted mail
The head of the service group can remove all empty cages within the selected rooms in the room inspector
Stricter control for adding a task which includes setting up a mating.
It is possible to import more lines, strains, loci or licenses from a group to the service group in a single step
New Cage Card printers "CECAD ivRF Stock", "CECAD ivRF Mating" and ""CECAD ivRF Harem"
New Cage Card printer "LIMES"
New columns mode for mouse tables "Father BD" and "Mother BD" which show birthdays of father or mother respectively
New attribute for users: phone number
Improved mail handling for Service caretakers
Service caretakers can search active cages with a specific number
BugFix: RackDisplay refresh after room or group transfer
BugFix: Import new mice as service caretaker

V 6.3

Permanent Tasks. Tasks can be defined for a longer period. This can be used as a steady reminder to e. g. look for a specific mouse or supply a specific diet or treatment. These tasks will not be marked as finished and are on ly shown at the specified dates. The user can also specify that during the period of the task it should be performed only every other day or only at at specific day of the week or other possibilities.
Address lists. In the tab "Other objects / Definition lists" the gurus of the groups and the head of the service group can define addresses of suppliers or recipients of mice. While exporting mice one can specify the receiver of the mice. When creating new mice it is also possible to specify the supplier if the address is defined.
Improved Multidimensional report can be used also specifying only dimensions for either rows or columns
New mode for Multidimensional analysis: "weaning" for the number of days befor a weaning is necessary
New mode for Multidimensional analysis: "origin" and "destination" for the addresses of suppliers or recipients
BugFix: Pattern color was not shown properly for Lines with permanent "line/strain" mode

V 6.2.3

New Cage Card printer "UPenn"
It is possible to define a second license for mice
For a given line you can specify that the color mode for line is always "line/strain".
It is possible to define the foreign ID of cages
It is possible to sort the license table by group names
It is possible to display and sort the strain table by the eartag prefix

V 6.2.2

It is not possible to get a second administrator session. But a secondary administrator session is started allowing shutdown of server and removal of sessions.
It is not possible to enter alleles with identical names for a locus
BugFix: Changing locus-attributes in shared line could cause loss of locus information in regular groups.
BugFix: Loci with identical alleles could lead to problems for import and group transfer

V 6.2.1

New mouse table column "latest symptom list" shows the date of the last entered symptom list. Tooltip of the respective cell shows the details of the symptom list.
List of loci in the head of service mode shows name of the locus and the associated alleles
It is possible to get a proposition for the next eartag based on group and line of the mouse
Alert if mice with the same last two eartag-digits will be put together in a cage. Can be activated via the preferences dialog.
Problematic cages for transfer are marked in the rack display by traffic signs.
New Tab in the mouse window for Service caretakers in which they can see the mice which were removed in the room (i. e. killed or sacrificed while the mouse was in this room not transferred to another room) of the session during a selected period.
It is not possible to clear names of Lines, Loci etc.
Also service caretakers can set the owner of mice if no owner is already set
DMBR-A6 variant printers also show the cage position
Copy table with format improved
BugFix: Copying selected lines to the clipboard was compromised on Mac computers

V 6.2

Loci, Lines, Strains and Licenses can be maintained within the service group. As with the racks, these objects can be defined by the head of service. The head of service can give the individual groups access to of these objects. These objects can also be imported from the groups.
It is possible to enter clinical symptoms / health reports for mice. You can also search for these reports using the professional search
The dormancy limit (i. e. the idle time period before client goes to dormant mode automatically) can be set from the Mausoleum Administrator
It is possible to reserve licenses for defined groups
Genealogy tree can be fully expanded or collapsed starting at a given node by SHIFT-clicking the little "+" or "-" box.
Also strains can have an eartag prefix. This prefix is shown for all mice which are (100%) of the respective strain in front of the eartag of the mouse.
Login for Caretakers allows now to specify Task type and count mode.
Masters and Service caretakers can edit the foreign ID of mice
Service caretakers can now also see the users of the service group and change their own password
Service caretakers can now also see the loci, lines and strains and the attached documents of the groups which have access to the room of the session.
Gurus of a group and the head of the service group can produce a "quota report" which shows the defined quota and the usage by Bbuilding, room and rack
It is possible to send a mail to the primary owners of selected mice via the "Send mail" action button.
A mouse can be marked as pregnant as judged by visual exmination. Pregnancy can be reset or is automatically reset when mouse produced a litter.
A new tab in Mouse- and Cage-Inspector to see and alter the content of the Mouse- or Cage-Pool
New Cage color mode: "Separated females". Cages with single females, which were separated from a mating are colored up to four weeks according to the duration of loneliness.
The comment can also be shown in Mouse-tables
Cage cards "DZNE Stock", "DZNE Stock S2" and "DZNE backcrossing" show always the group of the cage. Cage license - if present - is shown in second line
CalendarPanel allows bigger range of years.
BugFix: Multidimensional analysis did not work properly for Service caretakers

V 6.1.7

BugFix: Service Unit Report with negative quota

V 6.1.6

Improved cache mechanism on client
Modification of printer "DRBM A6 Testbreeding"

V 6.1.5

The guru of a group can manually set father or mother for a mouse if the mouse has no father or mother defined respectively. To do so you search the respective parent by whatever means and put this mouse in the mouse-pool. Then you can select in a mouse-table one or more mouse for which father or mother isn't set and using the context menu (right mouse click) you can define the mouse in the mouse-pool as father or mother.
New label printers "DRBM A6 Vas Stud", "DRBM A6 Foster" and "DRBM A6 Testbreeding"
Ancestor- and Progeny-Display can be restricted to a defined number of generations
Multidimensional cage analysis can be restricted to different bases sets (e. g. filled cages, mating cages)
New criteria for multidimensional cage analysis: Cage status (discrimates between filled and empty cages)
Alert for incoming mail improved

V 6.1.4

Multidimensional analysis available for head of service
Label printers "DZNE stock" and "DZNE stock S2" show the strain information for breeder mice

V 6.1.3

Result of multidimensional analysis can be exported to Excel file
Split modes in popup menu for "Split table by" are sorted alphabetically
New mode for split table: Genotype
Improved handling of clicks in the task tree
Double safeguard mechanism for Client-Startup

V 6.1.2

Data from genealogic trees (ancestors or progenies) can be exported with or without the table information. Export can be restricted to the displayed mice.
New coat color "chimeric"
Server-Client communication via DataStreams

V 6.1.1

Improved Server-Client communication
Possibility to stop the server via the command line on the server computer using the command "java -cp Server.jar mausoleum.main.ServerKiller localhost" or "java -cp Server.jar mausoleum.main.ServerKiller 127.0.0.1" depending on your system.

V 6.1

Adaption to problems with Java 1.6.0_51 on Mac computers
Modification of the multidimensional analysis. The user can see all the possible values of a certain criteria and can select or deselect them via double click or the context menu.
New modes in multidimensional analysis: Genotype, Start mode, End mode, Result
The group of foreign cages in shared racks can be retrieved using the popup menu which appears on right-click on the cage of interest
Cage card view can be scrolled using the mouse wheel

V 6.0.2

BugFix: Creating of new groups failed
BugFix: Database-check of dead mice could lead to StackOverflow

V 6.0.1

Improved Search-Panels
BugFix: Object-Log for finished sessions

V 6.0

Multidimensional analysis of mice. It can be invoked via the "Report"-button (starting a multidimensional analysis of all mice) or via the context in every mouse table (starting a multidimensional analysis of the mice displayed in the particular table). The desired attributes for rows and columns in the resulting table can be dragged in the boxes on top of the window. The resulting table is shown below. Clicking onto on of the cells, rows or columns displays the respective mice in the lower table.
Tissue samples
Defined lists for tissues, preparation-, embedding- and fixation methods which can be edited by the GURU of the group
New search mode in professional search: tissue sample. Mice can be searched for which tissue samples were defined. It is even possible to search for specific tissues.
New Experiment type: "Empty". This type can be used to store information about a specific procedure like injection or a special diet which produce no specific result.
It is possible using the extended or professional search just to calculate the number of matching mice instead of displaying all of them in the result table which makes the searches much faster.
New search mode in professional search for mice with pure wt / pure non wt and mixed genotype
Head of service can see the names of lines and strains of the groups and down- or upload documentation files
Dialog to set mark can be closed by typing 'Return'
New 'foreign' tasks (i. e. task for mice which cannot be modified by the user) are not shown in task window
It is possible to print out all displayed fact sheets at once.
The access of group caretakers and novices can be limited by the group's guru to defined rooms in the User inspector
Also unread mail can be removed
Minimized windows will be restored when needed
New backup mechanism
Indices are used for relation information and searches
Results are stored within the mouse data and not as separate object
Modified directory structure on the server
BugFix: Task-Autocompletion "by transfer to a mating" didn't work porperly if incest alert was disabled

V 5.13.2

BugFix: "Documents" pane was not updated properly

V 5.13.1

BugFix: Refresh of "Add result" pane in case of only one available experiment

V 5.13

Task tab in Mouse and Cage inspector
Actions can be performed for objects selected in an inspector table (e.g. the mouse table in the cage inspector) via the context menu (right mouse button)
Mark can be changed also for dead mice
Comment can be changed also for dead mice
In the professional search it is possible to search for mice with specific results of experiments
Extended litter report
Mating efficiency report in mouse fact sheet shows dates of liaisons
Improved structure of the context menu
New Preferences: Show or don't show acoustic or visual alerts for new tasks or incoming mail.
New Preferences: Display or don't display incest alert for breeding of siblings
Total number of mice in group or room (for caretakers of the service group) is shown in main mouse table tab
Head of service can invoke a group report via the "Report" button in the Inspector
Double click in the genealogy tree opens the mouse ID-card
Improved startup procedure
Improved "Add result" panel
Cage selection in cage card view improved
Via the context menu of any table you can count also the number of selected objects
General code review

V 5.12.1

BugFix: Selection refresh in Inspector

V 5.12

In the task tree (found in the "task list" tab of the task window) there is a new hierarchy level for all task status. For instance the pending tasks can now be easily grouped by issue date, by due date, by procedure, by rack or by room.
A color can be defined for standard tasks. This color is shown in the little triangle in the first column of mouse or cage tables. The color shown here corresponds to the color of the color of the task with the earliest due date. For some system tasks the color is defined. The system defined standard task "Kill" is red, "Transfer" is green. Non standard tasks ("Other") are shown in dark gray. Default color is a light gray. The color of institute-defined standard tasks can be set by the HEAD OF SERVICE user. The color of group-defined standard tasks can be set by the GURU of the group.
Task triangles like the ones shown in the first column of mouse or cage tables can be shown in the rack display. Whether or not these triangles are shown there can be defined using the preferences.
New tooltip mode for cages in the rack view and in cage tables: tasks. There are now three modes in the "cages" tab of Preferences window
- simple: tooltip shows a list of the mice with the line color as background
- tasks: tooltip shows a list of the tasks scheduled for this cage
- cage card: tooltip shows the cage card (using the last chosen label printer). A zoom factor can be chosen.
The rack selection element in the rack window shows as tooltip the tasks of the selected rack
In the rack overview you get as tooltip the tasks of the rack where your mouse pointer is over.
New column for cage tables: "Tasks" shows the number of tasks for the mice in the respective cage
New column for standard task tables: "Definition type" shows whether the standard task is a system-, institute- or group-defined task
New search mode for cage search: Search cages with tasks
In the main task table you can select individual tasks by clicking while the ALT-Key is pressed even if you determined via the Preferences that connected tasks should be selected together automatically. This is useful if you want to change a task for a single mouse only.

V 5.11

Tables can be filtered by an arbitrary text. E. g. If you specified "wt" in the filter element of the "genotype" column of a mouse table, only those mice will be shown for which the genotype contains the text "wt". You can filter for contained text or not contained text. In the example you can specify that you want to see only those lines with a "wt" in the genotype column or for those without a "wt" in this text. You can also specify to filter for more patterns spearated by a space. E. g. entering "+ fl" will show only those lines with either a "+", a "fl" or both in the respective column. This filtering is not case sensitive.
In filtered tables the filtered columns are indicated by a red header
Changing the settings for filtering or visibility (ownership for mice and cages) does not change the order of the shown lines and new lines are sorted in according to the last used sorting method
Improved filtering for cage numbers
Lines imported from Legacy system can be changed directly.
Task groups in the task list are sorted properly by issue date

V 5.10.8

Genealogy information can be copied to the clipboard

V 5.10.8

Display improvement in closeable tabbed panes
All temporary mouse tables are combined in one window
All temporary cage tables are combined in one window
BugFix: Tab titles with vertical text for Mac computers

V 5.10.7

BugFix: Missing choices in professional search

V 5.10.6

All main tables (mice, cages, mail, tasks etc.) are combined in one window
All mouse search tables are combined in one window
Cage tables can be filtered and split by the number of contained mice
Mouse tables can be filtered and split by eartag and cage number
Tree in genealogy display shows selection

V 5.10.5

Mouse image in pool field and cursor pointer shows mouse count
You can determine via the Preferences whether or not connected tasks should be selected together automatically in the main task table
Display modifications for blinking cages and table borders
BugFix: Drag cursor when dragging from pool field

V 5.10.4

Mice and cages can be dragged from the pool field.
In the cage card view of racks it is possible to select one or more (by CTRL-clicking) cages. By clicking the right mouse button you can invoke several actions for the selected cages.
BugFix: Incest alert for breeding of siblings

V 5.10.3

Foreign ID can be set for lines, strains, licenses, loci, users and mice in the inspector
Armis weekly report if logged in as Administrator (only if licensed separately)
Users can decide whether or not done, rejected or withdrawn tasks should be shown in the task tree by selecting the respective checkboxes in the "Tasks" tab of the Preferences dialog. Changes take effect after the next log in
Columns in tables can be reordered by drag gesture
Incest alert for breeding of siblings does not appear if the siblings have the same sex
The cage card printers DZNE Mating, DZNE Mating Extra, DZNE Mating Backcross, DZNE Mating Backcross 2 and DZNE Harem show the number of male and female pups instead of the parent ear tags. New printers DZNE-C Mating, DZNE-C Mating Extra, DZNE-C Mating Backcross, DZNE-C Mating Backcross 2 and DZNE-C Harem were created which still show the parent information as before
BugFix: Change of sex was not properly propagated to parents

V 5.10.2

New Filterable column in mouse tables: Eartag prefix of the line of the mouse
Every time a task is rejected the user has to give a comment and a mail is sent to the issuer of the task
Improved handling of splitted tables
Improved sorting
BugFix Rack display in fact sheet was not correct

V 5.10.1

Search for missing genotypes for a specific locus can now also be performed in the extended search
Service unit report shows figures of total cages and filled cages separately. Amount of empty cage per group is indicated in the graphical representation.
BugFix Visit-definition for legacy import

V 5.10

New exit mode for mice "by removal". This mode is used for mice which were killed but not used for an experiment for those use the mode "by sacrifice".
If some of your mice were killed by someone else you can see them in a seperate tab in the mouse window: "Removed by third party". Here you can see who removed those mice and whether or not the removed mice were active in matings.
New Cage card printer DZNE Magedeburg
New Cage card printer CECAD Mating Extra
New search criteria in Professional search for genotype ("partially set" and "fully set"). Now you have four options to search for genotypes for a given locus:
1. "not set": no genotype is defined for the locus
2. "partially set": some genotype is defined but not all necessary information is given
3. "fully set": all alleles are defined
4. "set": genotopyes ared defined either fully or only partially
In Professional search you can search for mice which have an undefined genotype for a specific locus. In order to do so select criterion "genotype", select "contains", select the locus of interest and select "not set".
In Professional search you can search for mice which have a defined genotype (without specifying which one) for a specific locus. In order to do so select criterion "genotype", select "doesn't contain", select the locus of interest and select "not set".
Comment, foreign key, alphanumeric tag and mark are transferred when cage is transferred to another group by service caretaker
Cage card printer "DRBM A6" shows mice sorted by eartag and in mating cages males first
Backups are produced only between 11 pm and 4 am
Changes in import from legacy system:
- Mice of breeder line can imported from legacy system.
- Empty cages are regarded as removed
- Cage numbers are created as continuous array
- Lines are created as changeable items
The minimal log level of the server can be set using the Administrator client
Objects are removed from splitted tables if objects left the room of the Service caretaker session
Bugfix: Display of double sided racks in Head of Service rack overview
Bugfix: Reset of allele name if multiple allele aliases are set

V 5.9.1

Minor changes in Extended Mating report

V 5.9

Extended Mating report with line and genotype-informations
New columns in Mouse tables: Eartag of father and mother. But be careful in using these columns. They can substantially reduce the performance.
Improved security handling.
Data can be imported from legacy systems via an Excel-file import.

V 5.8.5

Caretakers can change the date of a task. But they are obliged to enter a reason for it which appears later in the comment of the task.
New column in the task table: "Rack Position". It shows the position of the mouse in the Rack (e. g. "Front R:1 C:2" if the mouse is located in the front part of the rack in the first row and the second column). Double clicking a cell in this column brings up the Rack-window and shows the position of the mouse.
New column in the task table: "Line". It shows the line of the mouse as in the Mouse table
When more cages are selected the cage labels are printed according to the order of their position in the rack.
For Caretakers of the service group the task doesn't show done and withdrawn tasks anymore
BugFix: Transfer of cage to room was compromised in case of rooms which were not accessible for any group.

V 5.8

The head of the service unit can generate a list of all the active non-breeder lines of all groups. To produce this report click on "Report" in the Mausoleum inspector and then select "Lines report"
Improved printout of scaled tables.

V 5.7.7

Improved handling of rack handling in service group
Improved visbility of text in table columns with background pattern (e. g. line name)
Minor changes in card printer "DRBM A6"

V 5.7.6

Owner groups are also inherited from parents
BugFix: Problem while creating new group from demo

V 5.7.5

The head of the service group can define colors for the groups which are used instead of the default colors in reports or as cage colors.
New cage color mode "group". Cages are colored according to the group to which they belong
New table column "Results" for Mouse. The names of the experiments are shown for which results the respective mouse has defined results
New cage card printer "DRBM A6"
While chossing a color for a line, strain etc. a bigger color requester can be used in which also manual input for RGB, or HSV is possible
BugFix: Problems with cage color modes for new installed clients

V 5.7.1

New table column "Room" for Mouse, Cage, Task and Mating
BugFix: Groups created from a Demo were not immediately visible in the service group

V 5.7

New mouse attribute: coat color
New mouse search criterion: mouse age in days or weeks
Rooms can be grouped in buildings by the head of service. The buildings are only set in the service group.
Quota for cages can be set for racks, rooms and buildings by the head of the service group
The service report was modified in order to display buiildings and quota.
The head of the service group can invoke a rack view for each individual rack in the service unit via the "Overview" button in the rack inspector.
Guru users and Head-of-Service users can specify which notifictaion emails they want to receive. This is done via the "Privileges" tab in the User inspector.
In the license inspector one can create a table with all (living and dead) mice with the selected license.
Date columns (e. g. Birthday) can be used for filtering and splitting of tables. Using this feature the dates are filtered or splitted by the month (e. g. 2012/03) of the respective date.
Printing runs as separate task and does not block working with your Mausoleum

V 5.6.1

BugFix: Standardtasks could not be accessed by Head of service

V 5.6

If no suitable father can found and a candidate has to be chosen form the cage mates the user can select either in a table with the actual cage mates or in a table in which all male cage mates of the female mouse are listed.
New cage card printer "DZNE Backcrossing 2"
Cage label printers DZNE-Stock and DZNE backcrossing always show the cage in color mode Line/Strain
The head of the service group can enter individual Standard tasks which can be used by all groups. Therefore for any mouse you can add a new Standrad task from
- the set of the standard tasks defined in Mausoleum
- the set of the standard tasks defined in the group of the mouse
- the set of the standard tasks defined in the service group
You can enter a short detail description while creating new tasks.
In the task list (part of the task window) you are able to select several tree nodes at once
Additional age format: Mouse age can be displayed in days
The service report also shows number of matings in rack and room. In the graphical representation of the content the relative amount of matings is indicated by a darker rectangle at the bottom of each group rectangle.
BugFix: Determination of foreign (and therefore forbidden) cages while dragging mice as caretaker of the service group

V 5.5.5

It is possible for caretakers of the service group to transfer cages from one group to another group which has access to the rack/room of the selected cages (button "Group transfer" in Cage inspector).

V 5.5.4

It is possible for caretakers of the service group to transfer mice from one group to another group which has access to the room of the session.
Improved readability of service reports

V 5.5.3

Dialog for rearrangement of table columns supports drag and drop
The rack display of the service group indicates if mice cannot be dragged into a cage because of group restrictions. This happens if the dragged mice belong to a different group as the cage does.
Version check during startup

V 5.5.2

Service report also shows mouse count figures
BugFix: Father determination problems in service caretaker sessions

V 5.5.1

New cage card printer "CECAD"
Change in cage card printer "DZNE Mating Extra": Male mating partner is shown even if female was transferred to a new cage
BugFix: Date display in tables and fact sheets
BugFix: Cage selection for service caretakers in shared racks

V 5.5

Attributes in the inspector are shown in a table rather than as individual buttons. The behaviour however is unchanged. Attributes shown with a yellow background can be changed by clicking on them. Attributes with a white background cannot be altered e. g. due to missing privileges of the user. Attributes with a grey background cannot be displayed for the selected objects.
Improved display of owners of the selected mice in the "Owners"-tab in the mouse inspector.
It is possible to print out fact sheets and reports with all records starting on a new page.
BugFix: Client Object collision handling

V 5.4.4

BugFix: Preferences were not read properly

V 5.4.3

Alleles can be removed from lines if they were added by mistake. If an allele is removed from a line mails are sent automatically to the gurus of the group.

V 5.4.2

The contents of any table can be splitted according to the content of any column which can be used for filtering (e. g. the Strain or Line column in a mouse table). The resulting subtables are shown in a separate window. In this window there is a list showing the attributes of the selected split criterion. Upon selection of one of these criteria the corresponding subtable is shown.
Alleles can be made invisible by the GURU of a group
It is possible for the professional search to use placeholders for the date. This enables you to store preformed search definitions defining dates (e. g. Beginning of last month until end of last month) which will be translated into the respective date only during the search process.
New column for Mousetable: Weaning deadline indicates the number of days until the mouse should be weaned
Rack overview: improved display of shared racks.

V 5.4.1

There are several new tabs in the mouse window in which the mice of different age are automatically collected. You can check here for e. g. the newborns, the kids which should be weaned or the very old mice.
New columns for Mousetable: Father ID, Mother ID and an indicator for weaned mice
BugFix: Automated correction of cage-rack problems

V 5.4

New Search module "Professional search" which allows to create and store simple and complex nested search definitions out of a large number of mouse attributes. It is invoked via pressing the "Search"-button in the Inspector. Select the the new button "Professional search". A window appears where you can specify either a simple search definition (all criteria must match or at least one criterion must match) or a complex search definition in which you can group criteria in "AND" groups (where all criteria must match) or "OR" groups (where at least one criterion must match). These groups can be nested and criteria can be inverted. Search definitions can be stored for later reuse.
Room selection dialog at startup for service caretakers shows the number of tasks in the respective rooms
In the father selection dialog in case of multiple possible fathers the "Show all objects" button is selected by default
BugFix: DZNE Mating Extra printer didn't show removed father in special cases

V 5.3.2

Empty Racks are shown in the selection field of the rack window and in the overview window at the bottom using a lighter font.
Tasks of mice are also indicated in cage tables by the little triangle in the first column.
If the selected mouse in a table has defined tasks or the selected cage in a table has mice with defined tasks, you can directly switch to the tasks window by clicking "Show tasks". The respective tasks are collected in the "Temporary" tree node and shown in the tasks table. Here you can see, edit ore remove these tasks.
There is now an extra blank line for each weaned mouse in the weaning report
Changes in Printer "DZNE Mating Extra" and "DZNE Backcrossing"

V 5.3.1

New cage card printer "MSSM_Rendl"

V 5.3

Improved calculation of litters.
Cage card view faster and less memory consuming.
Cage color mode "Mating performance" now faster.
Refactoring of cage card printers.
Fact sheets with scaled tables. There was a problem with tables which were too wide
Display of fact sheets while dragging slightly modified
Cage card printer "DZNE stock" again shows the name of primary owner
BugFix: Display of male and female pups from litters was in some cases wrong
BugFix: Session information (new mices, weaned mice etc.) was cleared in dormant mode

V 5.2

Session reports. You can get reports for all mice which were created, removed or weaned and for all cages which were created or modified during the actual session. They can be created via the "Report" button of the Inspector. If there are any of these objects present you can select "Session report" in the litle selection dialog. Onbly those categories for which there are objects are selectable. Those sets which changed since teh last seisson report are preselected. The session reports can be treated like regular fact sheets.
Cage card view. In the rack window you find a new button "Card view" just beneath the "Overview" button. Clicking this button brings up a window in which you see a different graphical representation of one side of the actual rack. But here each cage is represented by it's cage card. You can change rack, side, cage card type. The zoom factor can be changed via the selection boxes and using the mouse wheel having the CTRL-key pressed. The visible part can be moved via simpel mouse dragging.
More Page formats are available for printouts
Primary cage owner can be displayed in cage tables
BugFix: Display of removed lines in Line selection supressed

V 5.1.5

Notification area in Inspector for new mail or new tasks. This area will turn red if new objects of interested arrive. Clicking this label wil bring the respective Tabel to front and cancel the alert. The alert will go away automatically after 5 minutes.
Object selection field gets a light red background if new mail or tasks arrived
In the Admistration Client there is a new tab showing all running client sessions. The Administrator can selectively kill any of these sessions.
Strains in the Strain selection are presented in alphabetical order

V 5.1.4

BugFix: Problems concerning notification of sessions without login
BugFix: Removal of groups from racks in service group

V 5.1.3

BugFix: Genotype display in intercross report

V 5.1.2

Caretaker can enter results for experiments
Startup procedure improved

V 5.1.1

BugFix: Automatic creation of service group fixed.
BugFix: Mouse mark color mode fixed.
BugFix: Import of backups could lead to creation of empty task entries.

V 5.1

Group reports can be created for prior periods (starting with the use of this version) You can create ad hoc reports (just the ones you know). In addition you have the opportunity to create reports for a specific date or a period in the past. You will get a similar report which shows average, minimum and maximum of mice, cages and matings for the various criteria.
New Cage card printer: DZNE mating Backcross

V 5.0.3

New color mode: Cohorts
Careakters can launch report and can select lines, loci etc. in the object selection field of the inspector
BugFix: Task Withdrawal had problems

V 5.0.2

BugFix: Display problem of color mode selection field on Mac computers

V 5.0.1

BugFix: Problem setting yourself as owner of mice
BugFix: Problem creating new cages via the cage inspector

V 5.0

Service group.
Mouse cohorts.
Owner groups. The guru can define groups of users which can be used as owners of mice like normal users. But you can alter these groups afterwards. The ownership is always determined on the fly. So for a given user Mausoleum checks the three possibilities for a a mouse ownership:
1. The mouse has no defined owner. In this case all users of this group own this mouse (if this is possible for the given user)
2. The user is a defined owner of this mouse
3. The user is part of an owner group which is defined as owner of this mouse
Security level for rooms. In general Mausoleum does not like transfers of mice between different rooms which have a defined security level. Nothing changes if the mice are not sitting in a room with a defined security level or if they are not moved in to a room with a defined security level. But if mice are tranferred between rooms with defined security level you will get an Mouse Pope Alert and an email is sent to the responsible people. If the security of the target room is higher the user has to justify the transfer by a comment which is appended to the mail.
Pool area can be used also for cages
More than one cage can be dragged to transfer area or pool area
Colors in tables can be chosen using "Arrange columns"
Info-Dialog. You can invoke a dialog with informations (current version and version tracker) by clicking the "Info"-button in the Inspector
Caretaker is generally allowed to set license
The Guru can revive dead mice. Be careful using this feature!
Column widths can be adjusted using the context menu
The width of a single column can be adjusted by double clicking the column separator in the column header
Printer DZNE Mating Extra modified
Table printing improved
Cage and Rack can be displayed in Task table
Cage snapshots and total content of cages are shown as tabs in one frame
Newly created mice, imported mice and litters are shown as tabs in one frame
Preferences are grouped in separate tabs
Complex sorting definitions can be defined and stored for all tables
The last set eartag is stored and the next number is used as default for the next eartag
There is an extra tab in the inspector for lines, loci, starins etc. showing the cages where mice with the selected object (e. g. line, locus, strain etc) can be found
The user can define via the Preferences which color modes are needed and also can set the order inwhich they are presented in the selection boxes.

V 4.24.12

Import of new group from demo data

V 4.24.11

Demo creation improved. ZIP file exchangeable with Apple systems
Minor GUI changes

V 4.24.10

Added a little tolerance to the father determination. The general rules still apply:
The rules are as follows:
1. If we find a unique candidate take this
2. If there are more possible candidates let the user decide which one
3. If we find no candidate the user can chose from mature cage mate(s). Was included because there could be an error in the date of the mouse transfer or the user imported a couple which was already in a mating in the group from which it was exported.
4. If there is still no candidate the user can choose from all actual male mice which were mature at the date of conception
5. If also there was no possible father (resp. the user didn't choose one) the litter i screated without father
Options 2, 3 and 4 are only possible with certain privileges which are available only for guru, master (2, 3, 4) or cartaker (only 2)
But the primary candidate determination was a bit too strict in some cases. The begin of the "hot phase" is assumed to be 28 days before delivery and ends 16 days before delivery. If no potential father could be found Mausoleum tries day by day for additional 6 days. If there is a unique candidate this one is chosen. Otherwise the above mentioned rules b) to e) apply.
The Administrator can prepare demo versions of Mausoleum with the data of individual groups. This gives you the possibility to give this demo versions to new lab members to become a bit familiar with Mausoleum without modifying your actual data
Strains can also have a specific color
New color mode: Strain
New color mode: Line/Strain. This color mode is a bit peculiar. The color at first hand is determined by the mouse line. If it is a breeder mouse the strain color is used. But this color is then surrounded by a grey border.
Demo version is visualized in Scrollpanes
If you add a comment to a cage (using the "Add comment" button) you have the option to add it also to all mice in the cage automatically

V 4.24.9

More recipients for mail can be specified
The actions which are invoked by pressing the blue buttons in the "Actions"-area of the Inspector can be invoked via the context menu
Litter detection is more tolerant regarding the litter date. E. g. If you enter a litter and you have to ydd more pups shortly after (Maximum 3 days) Mausoleum will now group these pups together as one litter
CIBIR printers show multiple lines per parent in mating cages if one line is too small for the information
Strains can be defined as a mixture (e. g. if you want to set a strain of an imported mouse to 50% BalbC and 50% C57)
While creating a litter with a strain micture mother's strains will be the first ones shown for the pup

V 4.24.8

Intercross report can now be generated also between different lines (actually it can be an intracross report). Results are shown in a table ordered by line and genotype of the pups.
New cage card printer DZNE backcrossing. It behaves similar to "DZNE Stock" but shows below the parent line the strain composition of the pups.
CIBIR printer also shows genotypes of parents in mating cages
BugFix: Patterns are supported by all cage card printers
BugFix: Patterns can be removed from Lines etc.

V 4.24.7

BugFix: Sending of new mail improved
New cage card printer caesar Mating II
changes in cage card printer caesar: For parents also the alphanumeric tag is shown if present

V 4.24.6

Guru can remove Weaning alerts. To do so the Guru selects in the weaning alert table the cages of which the alert has to be removed. Then one selects "Mark as weaned" in the context menu of the wean�ng alert table.
New mail shows up immediately in the mail table of the recipient
"Return" key can be used in all simple requesters parallel to the "YES" button (if a requester doesn't do it please report)
New cage color modes: Cage mark and Mouse marks
New cage card printers caesar and caesar mating

V 4.24.5

Modification of DZNE Harem Printer. Eartag of females is shown
Modification of CIBIR printer. Alphanumeric tag is shown for parents
Modification of Koeln printer. Number of adults

V 4.24.4

Mice in Tooltip and on cage cards are sorted by Eartag and System-ID
new cage card printer Koeln Mating Extra shows parents also if they already left the cage
BugFix: Mating report shows up upon Menu selection

V 4.24.3

For lines, licenses and users also patterns with two colors can be used
Prefix "M" and "S" removed for mating and stock cages, when mating mode is selected for Cage color mode
If a litter is produced from parents which do not have the same line and more than 1 line matches exactly the loci and alleles of the parents you can select form the matching lines which one will be used for the offspring
Double click on Mouse shows again the ID-card
new cage card printer DZNE Harem
new cage card printer DZNE Mating Extra shows parents also if they already left the cage
DZNE-Mating printers marks pups as alive if they either are still in the cage or left the cage not by death. It does not check wether the pups are really alive at the moment of printout.

V 4.24.2

Plugdate-display improved
Task ID can be shown in Task tables.
Connected tasks (i. e. tasks which were created together e. g. you select two mice and add the task "transfer") can be selected in task tables via the context menu.
Improved search for genotypes. Using "Extended Mouse Search" you can specify also genotypes for non autosomal loci. You can also select alleles for more than one locus. Using this you can search for specific complex genotypes.
CIBIR printer shows parent information per mouse
New Printer DZNE Stock shows mice sorted by parents and displays information about the parents in separate line
BugFix: Allele name in New Line-Requester

V 4.24.1

BugFix: Creation of new Cages was blocked

V 4.24

Generation markers can be set for each mouse. They can be viewed in the mouse tables as P, F1, F2... by selecting the appropriate column. While generating a litter Mausoleum calculates the generation of the offspring. If you defined the generation of an animal this number will be displayed. Otherwise the generation is calculated from the generation markers of mum and dad if available. If there are differences (e. g. you cross a F2 with a F5) the generation marker of the offspring is the the largest number from the parents + 1. But the generation markers of the parents will be displayed in this case.
Individual standard task can be defined with automatic completion by setting a result for a given experiment
Tasks are shown for all mice which can be modified. Even if a different favorite is set.
In Task list and Schedule you have a separate mouse table which shows the mice of the selected tasks. You can change their attributes directly from there.
Weaning alert ans plug alert is checked also for foreign cages and mice if privilege is sufficient. In the responsible tables the "A" button shows normal behaviour
When cage color mode "mating" is used, mating cages where at least one of the parents has a missing genotype are shown in a darker red color
Mouse ID-card is only shown as tooltip in genealogy tree or factsheets. Separate action button in mouse inspector was removed
Mating report, visit report and plug report can now be invoked via the context menu (right mouse button) in mouse tables.
Table with killed, newly created or weaned mice is shown in separate tab with the main mouse table. Separate action buttons in mouse inspector were removed
Table with newly created or touched cages is shown in separate tab with the main cage table. Separate action buttons in cage inspector were removed
Tables fo lines, strains, loci, rooms, experiments and users are shown in one window as separate tabs
Mouse pool buttons in Mouse inspector
Login window will close after 10 minutes without input
Creation date appears on group report
Aumtomatic genotyping cannot be set for non autosomal loci
"Add comment" button in cage inspector for setting the same comment for more cages at once
CIBIR printer has smaller font for mouse info; alphanumerical tag added
OsloMating printer shows all cages as matings and also the litters even if one of the parents already left the cage
New Printer DZNE Mating
BugFix: Weaning Alert picked up to many cages during session
BugFix: Weaning Alert and Plug Alert was deleted while sleeping

V 4.23.2

New CRIB printer
Use of shorter date format on cage labels
BugFix: Sleepmode panel in inspector visible -> Return to active mode possible

V 4.23

Fact sheets for all objects. This feature gives you nicely formatted fact sheets for the selected objects in a table. Select "Show fact sheet" in the context menu. It will show all relevant data. You can also use the fact sheet frame like browser. You can click on everything which is shown in blue. But you can also use multiple tabs (names are changeable), move backward, forward or open link in new tab or window.
Group report changed to new fact sheet format.
Visit report changed to new fact sheet format.
Mating report changed to new fact sheet format.
Plug report changed to new fact sheet format.
Mating, Visit, Plug report and Breeding performance are part of the Mouse factsheet
Object logs are now available (correcting also some oddities reported by M. V.) for all objects. You get it by selecting "Show object log" in the context menu of tables. It shows all the the sessions and the commands by which the respective object was modified
Session protocols are revised. As a Guru you select the User and click on "Show sessions". In the resulting window you see a list of all sessions from this user. You see the session with commands in bold. Clicking on one of these sessions shows in the panel on the right hand side all the commands performed during that session.
Licenses can be specified with Attributes like license holder, start and end of validity and maximum mouse count. You can also specify the users, who might use the respective license. In the Mouse inspector you find an extra button in the "Attributes" tab where you can specify the license for the selected mouse. The License table shows you the maximum number the used number and remaining number of mice as well as the killed, died and exported mice for the licenses.
Documents can be attached to Rooms, Loci, Lines, Strains, Experiments and Licenses. These document can be seen in the "Documents" tab of the respective inspector. You can download the selected documents to the client computer.
Finetuning of user privileges. The privileges of a user can be seen on a very basal level in the "Privileges"-tab of the user inspector. The Guru can selectively remove any of those privileges for the other users. E. g. A caretaker might have the permission to specify the eartag but not the genotype.
You can specify a time preference for Tasks (morning, noon, afternoon etc...)
In the Task window you will find in a second tab a schedule of all your pending tasks. You can specify the time period (i. e. how many days from today on) should be shown. You can also get printout. If you select a task you will see the details of the task in task table below the schedule.
You can change the due date and time preference of tasks (if you are issuer of the task or Guru) in the schedule tab by drag and drop.
Additional standard tasks can be defined and edited in a third tab of the Task window. You can specify the description of the task, whether the task can be assigned to male, female, unset or any mouse and the action by which the task is automatically finished.
Also task bundles can be defined. You can select two or more standard tasks and declare this bundle as a new standard task. You can then specify a day offset and a time preference (morning, afternoon etc.) for each of the primary tasks. If you later set such a task-bundle to a mouse several tasks are created for each of the primary task at the selected date plus the day offset specified before.
Improved determination of father during littering. The rules are as follows:
1. If we find a unique candidate take this
2. If there are more possible candidates let the user decide which one
3. If we find no candidate the user can chose from mature cage mate(s). Was included because there could be an error in the date of the mouse transfer or the user imported a couple which was already in a mating in the group from which it was exported.
4. If there is still no candidate the user can choose from all actual male mice which were mature at the date of conception
5. If also there was no possible father (resp. the user didn't choose one) the litter i screated without father
Options 2, 3 and 4 are only possible with certain privileges which are available only for guru, master (2, 3, 4) or cartaker (only 2)
Sleep mode. Client sessions in sleep mode can not change or view any data, but can be come back to normal immediately if enough licenses are free. Sleeping clients are not counted as active when license count is checked during login.
Automatic sleep mode if user is inactive for more than 30 min. A dialog is shown for 2 minutes in which the user can disapprove the automatic sleep mode.
Old users are not shown as owners if mouse belongs to whole group
Old users are not shown as possible recipients of mail
Before/after date of exit (death or export) as additional criteria in Extended Search
Improvement of cage-card tooltips
Display of dates standardized and date display format can be chosen in Preferences
Licenses on cage cards wil be displayed according to these rules:
1. if a License is set for the cage set this is used with "[c]" in front.
2. if licenses are defined for teh mice these are used with "[m]" in front
3. if nothing is found by (a) or (b) the group name is used with "[g]" in front
Plug date alert and Weaning alert are now a part of the Tasks window.
Search for cages or mice now also available via general Inspector button
Simple mouse search is now a non modal Frame and search results are kept in (closable and renameable) Tabs
Genelogy information is now shown in one Frame and pedigrees are kept in (closable and renameable) Tabs
General group report now also available via general Inspector button
Improvement of Excel im- and export.
Zoom factor for cage card tooltips can be set in the Preferences tab
New columns for Mousetable
Right mouse click does not affect selection in tables even if clicked in unused area (below object rows) but Popup-Menu is shown.
Inspector is resizable
Font size for tables can be set in Preferences
Mouse tables in inspector selectable
BugFix: Undo/Redo could lead to Objects with erratic attributes
BugFix: Sorting by age in mouse tables identical for living and dead mice

V 4.22

Redesign of Inspector
Mice having selected Line/Locus/User can be seen directly in "Mice"-tab in the respective Requester
Improved Initialization-Process
Improved Cage-Coloring; Explanation of colors as tooltip in Mode-Selectionfield
Task of removed objects (e. g. killed mice) are shown in a separate category, are regarded as finished and can be deleted
BugFix: EOF-Exception in some environments while shuttingdown client
BugFix: Occasional Dead-locks

V 4.21

Technical ID, Group etc. as potential columns in Task-Table
Two cage color modi: "all Tasks" colours pending, in progress and finished tasks (light yellow), "active tasks" doesn't highlight finished tasks. If "all tasks" is selected the also little triangle and the task-tooltip is shown in tables for mice with finished tasks; otherwise not.
Mouse pool can be used to collect mice from different sources (like shopping cart on Amazon's web site). Available via popup-menu in mouse lists. In addition the pool is shown in the rackdisplay close to the transfer area. Mice can be put into the mouse pool by drag and drop. In this field double click opens a window with the mice in the pool. Also a popup-menu is available in this field.
Refined automated genotyping. If parents have different line than offspring and a specific locus is missing in the line of one parent this parent is regarded to be homozygous for the respective wild-type allele
Automated genotyping can be switched off for lines and loci
Improved generation of genealogy diagram

V 4.20

Dates for Task can be set to distant future
Setting genotypes is a standard task
weaning check is done even if only mother is defined
Problem fix: massive logging in some environments blocked

V 4.19

Excel im- and export
New Task concept (find document in Mausoleum User Group)
New privilege management
New design for Plug-Report
Cage cards can be used as tooltip
New user role "External". Can see only his own mice and cages
"Show position"-button in Task-Inspector
New cage color mode: Tasks. Color scheme as in the Task-list
New cage color mode: Breeding performance. A mating cage is green it has been less than four weeks since the last litter, orange (or yellow) if between 5 and 8 weeks since a litter and red if more than 8 weeks since a litter.
Main user of cage (e. g. for cage cards) is the user, who is primary user of most of the mice in the cage. If there is no unambiguous result, Mausoleum looks for the user who owns most of the mice in this cage. If there is more than one the user names are sorted alphabetically and the first one is used as main user.
More than 100 mice can be created.
Caretakers cannot be selected as mouse owner
EXTERNAL users can neither add plug-dates nor import mice
Right mouse click does not change selection of tables
Export of mice includes plug dates, alphanumerical tag and maturity limit
You can specify whether Cage-numbers or the System-IDs of cages are displayed
You can search for a specific tag within the actual mice and for System-ID within all mice
You can search for cages with specific system-ID
System ID, group, Start- and End-Date of the respective object can be shown in all tables
New mail requester: Recipient is selected (not typed in as before)
Better distiction of allel and locus in Genotype-Dialog
Rack-Display "nicer" for small racks
Mausoleum version and loggedin user is shown in Inspector title
Muaosleum version and build date of server and client is shown in Initialization-window
BugFix: Requester for specify allel order shows actual allel names
BugFix: WT-allel display in Locus-table adapts to Allel-Renaming
BugFix: Data extraction from email
BugFIX: Change of Administrator password
BugFix: Mating-Information (image) is transfered from tables to Clipboard as "x"

V 4.18

Bugfix HeadLess Exception during Server startup
Bugfix tester2 Group in Mausoleum Demo

V 4.17

Improved Backups
Improved Mouse report

V 4.16

Bug-Fixes (Label-Printers)

V 4.15

Tables can be filtered similar to Excel's "Autofilter" (invoked using context menu command)
MouseTable in RackFrame can be resized. a) change width of RackFrame -> cages get bigger/smaller b) change height of RackFrame -> MouseTable gets higher/smaller
Eartag-Prefix for lines (useful if eartag numbers are in scarce)
Tag for lines (use it for grouping your lines)
"Removed" Lines, Strains, Loci and Users can be seen and "revitalized" by Guru. In order to see these objects use the "A"-button in the upper right corner of the respective list. For (Frankensteinian) Revitalization click on the object and select "Activate object" in the Popup-Menu
smaller DMBR-Dymo Printer
Mating indicator either sign or letter
Improved table printing
Bug-Fix Mouse Import from email

V 4.14

new DMBR-Dymo Printer

V 4.13

Bugfix in Plugdate-table

V 4.12

Alleles can be renamed by Guru
Search all cgaes (also removed cages) with a given cage number (click on "Search cages" and find the button at the bottom.
Display of all mice which were in a cage (Button in Cage-Inspector)
Search for specific genotype improved
LabelPrinter "K�ln SPF Neu" slightly modified

V 4.11

Plug date History
1. there is the new TAB for the mice, where you can see all the plug dates (also the historical ones from now on) for all the selected female mice.
2. the date of the actual plug.alert is highlighhted
3. you can add plug dates (if only one female mouse is selected). This does NOT add a plug-alert. For this function you still use the lower "Set plug day"-button
4. you can also delete specific dates from this list. If the date to delete is the actual plug-alert this one is also removed.
5. for the selected male mice you can create a "Plug report". Here you find all the female mice which met the respective male mouse and the dates of the plugs they had while being together with the male mouse is shown.
automatic Focus for Password when Username and groupname is set
A button in the Cage-Inspector to move a group of cages to the transfer area.

V 4.10

Birthday-Column in MouseTables
Database check for unfinished Visits
Oslo-Printer

V 4.9

Multi-language support (Svenska) improved
Maturity Limit (Days until mouse become sexually active) can be set for Strain, Line and Mouse. Data processing order: Mouse > Line > Strain > DEFAULT (6 weeks)
Mating mode of cages is always determined by evaluation of actual mice
Caretaker creates new mice -> automatically "share with all users"
Caretaker creates litter -> automatically "use privileges of both parents"
improved startup sequence
Cages containing mice without line are displayed (using line color mode) with a hatched pattern. These cages do not look empty anymore.
display bug fixes: drag and drop in transfer area and right half of double cages

V 4.8

The name and Color of the primary user can be shown in a separate column within the mouse-tables. The color of the primary user is not longer shown in the "Mark"-column
Users can only be removed if they do not own any mice. That's only for safety reasons....
The rack display was not sufficiently updated when the colur of an user changed and the cage-diaply-mode was "User color"